Temperature Metrology
Measurements International is a manufacturer of a series of very low temperature coefficient, precision, stable resistors to provide stability and traceability for your temperature calibrations. MI has also become the world's leader in the supply of DC Comparator Technology Bridges for Resistance Thermometry applications.
Take a moment to review our Temperature Metrology Line, and put our accuracy, stability and reliability to measure for your organization.
Product Image
Model Number
Product Name
Product Description
4210A
Automated Four Terminal Matrix Scanner - 10 Channel
The Model 4210A is ideal for use in automated resistance and thermometry applications where a number of artifacts needed to be calibrated efficiently and
accurately.
4220A
Automated Low Thermal Matrix Scanner - 20 Channel
The Model 4220A is ideal for use in automated resistance and thermometry applications where a number of artifacts needed to be calibrated efficiently and
accurately.
6010T
Automated Thermometry Bridge
The Model 6010T is designed for automated resistance thermometry applications and provides the best accuracy and convenience based on the most recent developments in
current comparator technology.
6015T
Automated Primary Thermometry Bridge
The Model 6015T is designed for automated resistance thermometry applications and provides the best accuracy and convenience based on the most recent developments in
current comparator technology.
6242T
Automated Secondary Thermometry Bridge
The Model 6242T is a high accuracy resistance bridge designed specifically for resistance thermometry. Based on the Direct Current Comparator, its unique DC Reversal eliminates
thermal EMF effects to provide you with fast, reliable measurements under a wide range of
real operating conditions.
9210A
MI-Type One Ohm Standard
The Model 9210A MI-Type standard has been developed through years of research by NRCC and Measurements International and is now offered as an improved resistor design
to replace the L&N Thomas-Type One-Ohm Standard as well as other values.
9301JW
Standard Resistor Oil Bath - 95 Liter w/Interface
Measurements International's series of fluid baths are used for the maintenance of Standard Resistors and Shunts.
9302JW
Standard Resistor Oil Bath - 157Liter w/Interface
Measurements International's series of fluid baths are used for the maintenance of Standard Resistors and Shunts.
9331
Standard Air Resistor - 4 Terminal (1 to 1G Ohm)
These high accuracy working standards are used for precision, on-site, resistance calibrations for values from 1 ohm to 100 MΩ. They are small, light and rugged
resistance standards.
SPSCW XX YY 4
Teflon Cable Cut To Length & Finished - 4 Conductor
SPSCW 100 - 4
100 Meter Roll of Teflon Cable - 4 Conductor
Marcol 72
Laboratory Grade Resistor BathÊMineral Oil
4304T
Temperature Controlled 4 Element Resistance Standard
The Model 4304, a four-element resistance standard is the latest development from Measurements Internationals' series of DC resistors and shunts.
4310T
Temperature Stabilized Resistance Standard
The Model 4310, a nine-element resistance standard is the latest development from Measurements Internationals' series of DC resistors and shunts.
Celebrating 20 Years of Excellence in Metrology