DC Resistance
With over 15 years of experience, MI is the leading supplier of DC Resistance Measurement Systems and DC Standards around the world. Our broad line covers resistance measurements from 1µO to 100T ohms, and voltage measurements from a few micro volts to 1200 volts DC.
Take a moment to review our DC Resistance Line, and put our accuracy, stability and reliability to measure for your organization.
Product Image
Model Number
Product Name
Product Description
6800
Portable & Modular Quantised Hall Resistance Standard
The Quantized Hall Resistance Standard is internationally recognized as the representation of the ohm and is the most stable resistance standard known.
1000A
100 Volt Standard w/ 1, 2, 5, 10, 20, 50 & 100 Volt Output
The Model 1000A was developed as a low drift, stable, low noise 100-Volt Source for use with the Model 6000B High Resistance Bridge. However, its specifications also make
it suitable for use as a stand alone, portable voltage source.
4220A
Automated Low Thermal Matrix Scanner 20 Channel
The Model 4220A is ideal for use in automated resistance and thermometry applications where a number of artifacts needed to be calibrated efficiently and
accurately.
4220A/30
30 Amp Automated Low Thermal Matrix Scanner 20 Channel
The Model 4220A/30 was designed to be used in automated resistance and shunt measurement applications where a number of artifacts needed to be calibrated efficiently
and accurately.
4220-1
SR Series Hamon Adapter
The Model 4220-1 was developed as an easy means of calibrating SR1010 type resistance boxes.
4304
Travelling Resistance Standard
The Model 4304, a four-element resistance standard is the latest development from Measurements Internationals' series of DC resistors and shunts.
4310
Temperature Stabilized Resistance Standard
The Model 4310, a nine-element resistance standard is the latest development from Measurements Internationals' series of DC resistors and shunts.
4310-HR
Temperature Stabilized High Resistance Standard
The Model 4310HR, a six-element resistance standard is the latest development from Measurements Internationals' series of DC resistors and shunts.
4311
Temperature Stabilized Resistance Standard (nine element)
The Model 4311, a nine-element resistance standard is the latest development from Measurements Internationals' series of DC resistors and shunts.
6000B
Automated High Resistance Bridge - 100 Volt Version
The Model 6000B is a fully automated bridge using the Cutkosky Divider principle. Maximum voltage for the 6000B is 100 Volts.
6010Q
Automated Room Temperature QHE DCC
The Model 6010Q is an enhanced Direct-Current-Comparator bridge operating in room temperature air which allows two resistors to be compared with an accuracy of one (1)
part in 10-8.
6010C
Automated Resistance Thermometry Bridge
The Model 6010C is a fully automated resistance ratio bridge based on the Direct- Current-Comparator (DCC) principle.
6010C - 100A
100 Amp Automated Resistance System
The model 6010-100 is a completely "turn-key" system for measurement ratios of 1:1000 (1mΩ directly against 1Ω) up to 13:1 (1Ω to 13 kΩ).
6010C - 400A
400 Amp Automated Resistance System
The Model 6010-400 is a completely "turn-key" system requiring no manual intervention for measurement ratios from 0.000001:1(1 µΩ to 1 Ω) up to 13:1(1Ω to
13kΩ).
6010C - 2000A
2000 Amp Automated Resistance System
The Model 6010-2000 is a completely "turn-key" system requiring no manual intervention for measurement ratios from 0.000001:1 (1 µΩ to 1 Ω) up to 13:1 (1Ωto 13
kΩ).
6242A
Automated Secondary Resistance Bridge
The Model 6242A Automated Resistance Bridge is ideal for those laboratories involved in resistance and temperature measurements that do not require the accuracy level of a national
laboratory.
9210A
MI-Type One-Ohm Standard
The Model 9210A MI-Type standard has been developed through years of research by NRCC and Measurements International and is now offered as an improved resistor design
to replace the L&N Thomas-Type One-Ohm Standard as well as other values.
9300
Air Bath
The Model 9300 Series Air Baths are designed as a convenient and inexpensive way to maintain the temperature of air resistors in the calibration laboratory.
Marcol 72
Laboratory Grade Resistor Bath Mineral Oil
9300A
Temperature Controlled Chamber
The Model 9300A Series Temperature Controlled Chambers are designed as a convenient and inexpensive way to maintain the temperature of air resistors in the
calibration laboratory.
9301JW
Standard Resistor Oil Bath - 95 Liter w/Interface
Measurements International's series of fluid baths are used for the maintenance of Standard Resistors and Shunts.
9302JW
Standard Resistor Oil Bath - 157 Liter
Measurements International's series of fluid baths are used for the maintenance of Standard Resistors and Shunts.
9303JW
Bench Top Resistor Oil Bath
Model 9303JW is specifically designed for maintenance of oil-filled resistors when a large working area is not available.
9301-01
Resistor Holding Fixture
9301-02
Resistor - Scanner Interconnect Shelf
The Model 9301-02 solves the inconveniences normally associated with standard resistor oil baths.
9311A
Multiple Value DC Resistive Shunt
The Model 9311A Multiple Value DC Current Shunt is the latest development from Measurements Internationals' series of DC resistors and shunts.
9331
Standard Air Resistor - 4 Terminal (1 to 1G Ohm)
These high accuracy working standards are used for precision, on-site, resistance calibrations for values from 1 ohm to 100 MΩ. They are small, light and rugged
resistance standards.
9331G
Standard Air Resistor - 2 Terminal Shielded (1G to 100T Ohm)
These high accuracy working standards are used for precision, on-site, resistance calibrations for values from 100M to 100T Ohms. They are small, light and rugged resistance standards.
9332/XXX
Standard DC Resistor Shunt - 10 - 300 Amps
The models 9332, DC Current Shunts are the latest development from Measurements International series of DC resistors and shunts.
SPSCW XX YY 4
Teflon Cable Cut to Length & Finished - 4 Conductor
SPSCW 100 - 4
100 Meter Roll of Teflon Cable - 4 Conductor
SPSCW XX YY 2
Teflon Cable Cut to Length & Finished - 2 Conductor
SPSCW 100 - 2
100 Meter Roll of Teflon Cable - 2 Conductor
Celebrating 20 Years of Excellence in Metrology